Shower Remodeling in Eagan, MN | Walk-In Showers, Tile & Glass Enclosures

Eagan Kitchen and Bath Remodeling provides shower remodeling in Eagan, MN, combining 20 years of specialized experience with licensed installation for walk-in showers, tiled shower systems, shower floors, wall surrounds, and glass enclosures. Our technicians work with porcelain tile, ceramic tile, natural stone, waterproof shower panels, tempered glass, and corrosion-resistant hardware selected for the bathroom's moisture conditions and design requirements. Each shower renovation is planned around drainage, waterproofing, slope, enclosure dimensions, fixture locations, and the existing bathroom structure.

Our shower remodeling services include walk-in shower construction, shower replacement, tiled shower walls, shower floor installation, niche construction, corner shelving, linear and center drains, bench installation, and glass enclosure preparation. Shower floors are properly graded toward the drain, while tile sizes and patterns are selected according to the available surface dimensions and slope requirements. Glass enclosures can be configured with fixed panels, hinged doors, or other layouts based on the shower opening, clearance, and bathroom configuration.

Before installation, we inspect the existing shower assembly for water damage, deteriorated substrates, plumbing concerns, inadequate drainage, and unsuitable wall conditions. Waterproofing is installed across the required shower surfaces, with seams, corners, penetrations, and transitions treated according to the selected waterproofing system, while the shower base is constructed with proper slope toward the drain to control water movement and reduce the risk of moisture intrusion.

Shower repair and renovation work addresses cracked or loose tiles, failing grout, damaged shower walls, leaking areas, deteriorated sealant, drainage problems, and worn fixtures. We locate the source of the failure before repairing affected components, replacing compromised waterproofing or substrate materials when necessary rather than covering an underlying moisture problem with new finishes.

A standard shower remodeling project generally takes 5–10 days, depending on demolition, plumbing changes, waterproofing, tile installation, glass fabrication, and the scope of the existing shower replacement. Final use depends on required tile, grout, sealant, adhesive, and waterproofing curing periods.

Talk to Our Remodeling Team

Get a FREE Quote

Shower Remodeling for Walk-In Showers, Custom Tile and Glass Enclosures

Expert Walk-In Shower Remodeling Services

Walk-In Shower Remodeling Services improve accessibility, drainage, waterproofing, and interior functionality through a coordinated shower reconstruction system. Installation equipment includes laser levels, diamond wet saws, oscillating tools, mixing drills, waterproofing rollers, drain-setting tools, and precision measuring equipment for establishing accurate slopes and tile layouts. Shower assemblies may incorporate porcelain tile, ceramic tile, solid-surface panels, stainless or coated drains, waterproof backer boards, liquid-applied membranes, and tempered safety glass.

Demolition removes deteriorated finishes and existing shower components while preserving suitable structural elements that can remain part of the new assembly. The shower floor is formed with the required slope toward the drain, and waterproofing is extended across walls, corners, penetrations, and other vulnerable transitions according to the selected system. Substrate preparation is completed before tile or wall finishes are installed so the finished enclosure receives continuous moisture protection rather than relying solely on surface grout.

The completed shower includes coordinated placement of controls, niches, benches, showerheads, drains, and enclosure components based on the approved layout. Tile courses are aligned around corners and penetrations, while grout and flexible sealants are selected according to joint dimensions and moisture exposure. Final inspection verifies drainage slope, waterproofing continuity, tile adhesion, fixture stability, grout integrity, glass clearances, and finished surface quality.

Waterproof Shower Tile Installation Services

Waterproof Shower Tile Installation Services establish a durable tiled interior over a properly prepared moisture-management assembly. Professional tools include diamond-blade wet saws, laser levels, notched trowels, tile leveling clips, grout floats, mixing paddles, and waterproofing application rollers. Porcelain and ceramic tiles are commonly specified for walls and floors because their surface characteristics, format options, and maintenance requirements suit wet-room applications.

Waterproofing begins with suitable cement backer board or an approved waterproof backer system followed by treatment of seams, fasteners, corners, niches, and penetrations. Liquid-applied membranes or sheet waterproofing systems are installed according to manufacturer coverage rates and curing requirements rather than being substituted with grout or surface caulk. Tile placement proceeds only after the substrate and waterproofing system meet the required preparation and curing conditions.

Floor tile selection accounts for shower dimensions, drainage configuration, joint requirements, and slip-resistance characteristics appropriate to the intended application. Wall layouts are established around valves, niches, benches, showerheads, corners, and ceiling transitions to control cuts and maintain visual alignment. Final work is checked for consistent coverage, stable tile placement, proper grout depth, sealed transitions, waterproofing treatment, and clean finished surfaces.

Custom Shower Niche Installation Services

Custom Shower Niche Installation Services provide recessed storage for shampoos, soaps, razors, and other bathing products without requiring freestanding shelving inside the shower area. Construction uses framing lumber or compatible structural framing components, waterproof backer materials, membrane systems, laser levels, framing squares, tile saws, and precision cutting tools to establish the niche dimensions. Interior surfaces can be finished with porcelain, ceramic, mosaic, or accent tile coordinated with the primary shower design.

Niche placement is determined by wall framing, plumbing locations, user reach, bottle dimensions, and the surrounding tile layout before the opening is constructed. The niche floor receives a controlled pitch toward the shower interior so water does not remain trapped on the recessed shelf surface. Corners, seams, fasteners, and penetrations are integrated into the waterproofing system before tile installation begins.

Trim profiles, bullnose pieces, stone shelves, or carefully finished tile edges can be used to create clean transitions around the opening. Grout and flexible sealants are selected for the joint configuration, while movement-sensitive intersections receive appropriate caulk rather than rigid grout. The finished niche is evaluated for level shelf drainage, waterproofing continuity, consistent tile cuts, secure finish materials, and smooth integration with the surrounding wall.

Frameless Glass Shower Enclosure Installation Services

Frameless Glass Shower Enclosure Installation Services provide a clean enclosure system that uses thick tempered safety glass with limited visible framing and precision hardware. Installation requires glass suction lifters, calibrated levels, diamond drill bits, measuring tools, protective setting blocks, clamps, hinges, and manufacturer-approved fasteners. Glass thickness, panel dimensions, door swing, hinge configuration, and hardware finish are established through field measurements before fabrication and installation.

The finished tile surface must be sufficiently plumb, level, and structurally capable of receiving enclosure hardware before drilling begins. Tempered glass panels are positioned using protective setting materials and secured with compatible hinges, clamps, channels, or brackets without placing excessive stress on the glass. Silicone sealants are applied at designated water-control locations while maintaining required drainage paths at the shower threshold.

Door alignment is adjusted to establish consistent gaps, controlled swing operation, and proper contact with seals or adjacent panels. Hardware connections are checked for secure attachment without overtightening, and glass edges are inspected for damage or irregular contact points. Final testing covers door movement, panel stability, sealant continuity, clearances, drainage behavior, and overall enclosure alignment.

Expert Walk-In Shower Remodeling Process in Eagan, Minnesota

Bathroom Evaluation and Shower Design Development

We begin the shower remodeling process by evaluating the existing enclosure, plumbing configuration, wall structure, floor condition, drainage, ventilation, and available shower dimensions. Moisture-prone areas are inspected for deteriorated framing, damaged substrates, previous water intrusion, and inadequate waterproofing that could compromise the new installation. Laser levels, moisture meters, measuring tools, and inspection equipment are used to establish accurate site conditions before demolition and reconstruction begin.

The new shower configuration is developed around the available footprint, desired entry type, fixture placement, tile dimensions, glass enclosure requirements, and drainage strategy. We determine the locations for the shower valve, showerhead, handheld fixture, niche, bench, curb, or curbless transition while maintaining appropriate clearances for comfortable use. The layout also accounts for tile pattern alignment so wall joints, floor transitions, niche edges, and shower corners create a coordinated finished appearance.

Material specifications are selected according to the shower environment and installation requirements. Porcelain or ceramic wall tile, slip-resistant shower floor tile, cement backer board, waterproofing membranes, thin-set mortar, grout, sealants, and glass enclosure components are specified according to compatibility and performance requirements. The resulting plan establishes the demolition sequence, plumbing modifications, waterproofing method, tile installation approach, and enclosure configuration for the Eagan, Minnesota bathroom renovation.

Demolition, Plumbing Adjustment, and Substrate Construction

Existing shower materials are removed in a controlled sequence to expose the underlying framing, plumbing lines, drain assembly, and substrate condition. We use oscillating tools, pry bars, controlled demolition equipment, dust-management systems, and protective coverings to remove tile, backer board, fixtures, and enclosure components while limiting unnecessary disturbance to surrounding bathroom surfaces. Exposed framing and plumbing are then evaluated before new wall and drainage components are installed.

Plumbing adjustments are completed to accommodate the selected shower valve, showerhead, handheld sprayer, body sprays, or other specified fixtures. We use compatible supply piping, approved fittings, shutoff components, and precision plumbing tools to establish correctly positioned connections within the new shower wall assembly. The shower drain and floor structure are configured to support proper water movement toward the drain while maintaining the required slope across the shower base.

Wall substrates are rebuilt using cement backer board or an approved shower-rated panel system suitable for the selected waterproofing assembly. We fasten the panels to properly prepared framing, maintain required joint treatment, and create accurately aligned surfaces for subsequent waterproofing and tile installation. Niches, benches, curb structures, and other built-in elements are framed and prepared with dimensional accuracy so they integrate with the waterproof shower assembly.

Waterproofing and Shower Tile Installation

The shower enclosure receives a continuous waterproofing system designed to control water penetration behind the tile assembly. We install a compatible sheet membrane, liquid-applied membrane, or manufacturer-approved waterproofing system across the shower walls, floor transitions, corners, niches, and other vulnerable areas. Seams, fastener locations, pipe penetrations, and changes in plane receive compatible waterproofing treatments to maintain continuity throughout the wet area.

The shower floor is prepared with the required drainage slope and a tile surface selected for wet-area performance and slip resistance. We use modified thin-set mortar, appropriate trowels, tile spacers, leveling tools, wet saws, and diamond cutting equipment to install porcelain, ceramic, mosaic, or other approved shower tile. Floor and wall patterns are coordinated so grout joints remain aligned around niches, corners, benches, fixture penetrations, and transitions.

Tile placement progresses from established control lines to maintain consistent alignment throughout the enclosure. We back-butter larger tiles when required, maintain proper mortar coverage, and use spacers or leveling clips to control joint dimensions and reduce lippage. Shower floor tiles are carefully positioned around the drain so cuts remain balanced and water can move freely across the sloped surface.

Glass Enclosure Installation and Final Shower Inspection

Once the tiled surfaces have cured according to the specified installation requirements, the shower enclosure is prepared for glass measurement and installation. We verify finished opening dimensions, wall plumb, curb or threshold alignment, and hardware locations before the glass panels are fabricated or installed. Tempered safety glass, aluminum or stainless-steel hardware, hinges, channels, handles, and seals are selected according to the enclosure design and opening configuration.

Glass installation uses professional suction lifters, setting blocks, precision levels, drills, anchors, and compatible fasteners to position panels securely without damaging the finished tile. We maintain manufacturer-specified clearances and verify door swing, panel alignment, hardware operation, and enclosure stability throughout the installation. Silicone sealant is applied at designated joints and interfaces to help prevent water from entering areas that require protection.

The final inspection covers waterproofing continuity, tile alignment, grout condition, drain function, fixture placement, glass operation, sealant joints, and overall shower finish. We test the completed shower area for proper drainage and review the installation for visible defects, loose components, uneven transitions, or incomplete sealing. The finished Shower Remodeling in Eagan, Minnesota is then checked against the approved specifications before the renovated shower is placed into regular service.

High-Performance Shower Remodeling Designed for Eagan Homes

Water-Controlled Walk-In Shower Systems

We remodel showers with layouts designed around available bathroom dimensions, drainage requirements, wall conditions, and daily accessibility needs. Walk-in shower configurations can include low-threshold entries, built-in niches, corner shelves, handheld shower systems, and strategically positioned controls based on the intended use of the space. Proper slope, waterproofing, and drainage are established beneath the finished tile so water moves toward the drain rather than accumulating within the shower area.

Porcelain and ceramic tiles provide durable options for shower walls and floors, with material selection based on absorption characteristics, surface texture, dimensions, and maintenance requirements. Smaller-format or mosaic tiles can provide additional grout joints for sloped shower floors, while larger wall tiles can reduce the number of visible joints on vertical surfaces. Slip-resistant flooring materials are considered for shower floors where surface traction is an important design requirement.

The waterproofing system is treated as a critical component beneath the visible tile rather than relying on grout or tile alone to control moisture. Shower walls, corners, penetrations, niches, and floor transitions require compatible waterproofing methods to protect the underlying structure from water intrusion. Drain connections and shower-floor slopes are also verified before tile installation proceeds.

Custom Tile and Glass Enclosure Integration

We coordinate shower tile installation with glass enclosure dimensions so the finished walls, curb, threshold, and enclosure hardware align correctly. Clear glass, framed glass, and other enclosure configurations can be selected according to the bathroom layout, privacy requirements, hardware preferences, and available shower dimensions. Accurate wall preparation is essential because glass panels and doors require stable, properly aligned mounting surfaces.

Tile patterns can be arranged in stacked, running-bond, herringbone, vertical, or other layouts depending on the selected material and bathroom design. Corners, niches, benches, plumbing penetrations, and fixture openings receive detailed cuts to maintain consistent joints and minimize exposed unfinished edges. Grout type and joint width are selected according to the tile system and shower exposure.

The enclosure installation is completed after the finished tile surface has reached the appropriate installation condition and dimensions have been verified. Silicone or other compatible sealants are applied at specified joints and penetrations where flexible waterproofing transitions are required. Final inspection covers door operation, panel alignment, drainage, waterproofing transitions, tile installation, grout consistency, and enclosure sealing.

Bathroom Improvements Beyond the Shower Area

We can coordinate shower remodeling with related bathroom improvements when the project requires a broader renovation. New shower layouts may be integrated with updated vanities, mirrors, lighting, flooring, plumbing fixtures, storage niches, and other components to create a cohesive bathroom configuration. Material selections are evaluated for moisture exposure, cleaning requirements, durability, and compatibility with the surrounding finishes.

Walk-in showers can be designed to improve movement within bathrooms where traditional shower thresholds or bulky configurations limit usable floor space. Curbless or low-threshold designs require careful floor preparation because drainage slopes must be incorporated without creating abrupt transitions outside the shower area. These requirements are reviewed during planning so the finished bathroom provides both practical access and effective water management.

The completed shower is inspected for tile alignment, grout joints, drainage performance, enclosure fit, fixture operation, waterproofing transitions, and finished sealant lines. Any installation adjustments are addressed before the bathroom is returned to normal use. This quality-control stage helps verify that the remodeled shower performs properly while maintaining the intended design and finish.

Create a Safer, More Functional Walk-In Shower

Upgrade an outdated shower with a properly waterproofed walk-in system, durable tile surfaces, and a glass enclosure configured for your Eagan bathroom. Contact Eagan Kitchen and Bath Remodeling to review shower dimensions, tile selections, drainage requirements, fixtures, and enclosure options. Schedule a remodeling consultation to establish a shower configuration built around your space and everyday requirements.

Shower Remodeling FAQ's

A walk-in shower remodel can include demolition, substrate preparation, waterproofing, drainage modifications, wall and floor tile installation, shower fixtures, niches, thresholds, and glass enclosure installation. The exact scope depends on the existing bathroom condition and the desired shower configuration. Structural, plumbing, and floor requirements should be evaluated before the final layout is established.

A properly constructed shower uses a dedicated waterproofing system behind or beneath the finished tile to control water that reaches the installation layers. Waterproofing must cover shower walls, floors, corners, penetrations, niches, and other vulnerable transitions according to the selected system's installation requirements. Tile and grout provide the finished surface but should not be treated as the primary waterproofing barrier.

Quartz and granite are common countertop choices for kitchen remodeling because both provide durable surfaces appropriate for food preparation, daily use, and high-traffic kitchen areas. Quartz provides manufactured consistency across colors and patterns, while granite offers natural stone variation with individual veining and color characteristics. Selection should consider cabinet configuration, countertop dimensions, maintenance requirements, edge profiles, sink cutouts, and the desired design of the remodeled kitchen.

Shower floors require materials with appropriate moisture resistance and surface characteristics for wet conditions. Smaller porcelain or mosaic tiles are often useful because their multiple joints can conform more effectively to sloped shower floors while providing manageable surface sections. The final material should be selected based on slip resistance, tile specifications, drainage slope, grout requirements, and maintenance expectations.

Yes, a recessed shower niche can provide dedicated storage for soaps, shampoos, and other bathing products without requiring external shelving. The niche must be properly framed or integrated into the wall system and fully waterproofed at its corners, seams, and penetrations. Its dimensions and location should be planned around wall structure, plumbing, tile layout, and convenient reach from the showering area.